Attach an acrylic window.

---

Olah!
To make my own little window of acrylic.
Jah seen many posts on how to do, how to cut and everything.
Now a No one thing explains q eh fixation of the same.
How do eh I saw a post where the guy used instead of rubber
"own" (akela car ) Own to cover the wires.
Madness in my view, cause there is no as he set the acrylic with the
cap wire ... or is there

--- I'm starting to sell plexiglass windows, but I'll just have a little problem and windows ready next week, if you're interested send a PM or email.
If you want I can sell only to fix the rubber.

--- The cover of wire is just to take the edge of the plate, not to hold the acrylic ... The acrylic will behind the wire and can be pasted inside the plate (the acrylic can be about 3 cm longer than the window), or screwed, as I did ... You can use rubber H, only it is more difficult to fit and I think it should drop easily ... I had seen a site that gringo guy used putty (or whatever durepox) I bought durepox to fix but from what I read on the package does not adhere well to plastic (or metal Hehehe not remember anything) So I called good and pro Old screw. But if you want to appear nãoq the screw head, I think we just need to paste it. --- Let it

. (Experience)
1 Purchase the acrylic cut already in the format that you want!
2nd Place the acrylic on top of the lid and draw its shape (put masking tape to the scratch the own cover), there You just cut a one centimeter less steel than the acrylic.
Buy 3 profile rubber "U" - 1 cm or more.
4 Buy 3M double sided tape.
T
---
thiagomz oops!
you set the acrylic with double sided tape
eh those thick, thin or q or even duct tape pq if the thick will be a certain distance between the cap and not acrylic
Falow! ---

Was with the same thin, bought in leroy merlin!
It was very good, even with the cover was a hell of a tight hole!
T ---

kra Cool! It should get better q ... use glue
yet to give a researched the price of acrylic to see if it will take to do a little window here.
Thanks! ---

Rubonov,
get a little worried ...
set screw type q in the heat, the acrylic will dilate, contract
... and maybe just cracking with screws (not )
Secure with tape I think gabiarra q is a little "safe" ....
qa will glue (with heat tb) is dropping .... The rubber
H seems the best solution.
But let's see how much better it is .... qqr thing, I have my good old black and decker drill
q inherited from my father. I
pros bolts holes and fixed this ***** anyway. ---

Coultier,
Tape 3M stand 900 grams of weight (it's written on the box), and is not ganbiarra not!
I had pasted it yes it was ugly hack, but the tape was a clean and great quality! : Wink: The only
Barracha H I met, was a monster too thick, did not make the curves of the hole, if you find a thinner and more malleable, totally agree with you that the service is actually better! < BR>
But there's a hint, who is married to the first mode, makes rubber and U with double sided tape, the problem of using H is that the rubber hole and cut the acrylic has to be very accurate , type the hole must be larger than 0.4 cm acrylic, because when you apply, the rubber has a thickness of 0.3 cm (fictitious values ​​! )

Tipow gets a little more difficult to set: xl, but nothing impossible.
But ... be the first modification is best to start with easier. ok! That's how you learn things! : Wink:

--- Do you have reason .... eh
to start at the most "easy" ....
but have ambition, made up some plans, I cut, I do
outline with rubber thread and screw or
fixed with tape, as you suggested.

Thanks Thiago! ---

Coultier, my ta prafusado makes about 6 months and is okay ..... only thing I noticed is that the screws loose, occasionally have to tighten a little. --- My

I gave the finish with a cape of blue wire and glued the window with silicone glue was cool, the only problem and I scratched the case with the saw tico tico, but then I'll paint there the issue is resolved.